Quick Answer: How do you start a Harley Davidson without a key?

What do I do if I lost my Harley-Davidson key?

While it’s advisable to have a spare cut before you lose your original, there are ways to get a new key. A locksmith can use your bike’s ignition cylinder code or the entire ignition cylinder to make a new key. You also have the option of reordering a key from a local dealer, using your bike’s VIN.

How do you start a motorcycle without a key?

Starting Your Motorcycle Without a Key

  1. Locate your wiring system and look for 3 wires intertwined together in a sleeve. …
  2. Follow the wires to the place where they end. …
  3. Pull the cap, find your ignition wires, hold on to the lower wires. …
  4. Put one end of a wire into an eye of a socket, put another wire into another eye of a socket.

26.10.2017

How do you start a Harley with a pin?

Press and hold the left turn signal until you see “Enter PIN” flash on the speedometer. Using the left turn signal to cycle through the digits and the right turn signal to select and move onto the next slot, you enter your personalized five-digit PIN and your bike will start.

IT IS INTERESTING:  Who was the first motorcycle manufacturer?

What to do when you’ve lost your keys?

Keep reading to learn what you should do.

  1. Contact your insurance company. This applies to both lost or stolen house and car keys. …
  2. Call the police. …
  3. Change your locks. …
  4. Watch out for locksmith scams.

30.10.2019

How much does a Harley Davidson key cost?

Compare to other motorcycle and car key, Harley Davidson key is one of the best keys to lose. The average cost for a replacement key made by vin is $50 and can be done by most if not all local authorized Harley Dealer.

How easy is it to steal a motorcycle?

How do thieves steal motorcycles? Sometimes it’s as easy as throwing a leg over and riding away. The thief walks up to your bike, disables anti-theft devices and locks, jump starts the engine and hits the road with your bike. It just takes one person who can get dropped off or take a bus to get within walking distance.

Can a locksmith make a key without a key?

If it’s a lost key a locksmith can make you a key without the original, as locksmiths can make keys to lock by hand. By using a blank and a file and the skills, they’ve developed over the years a locksmith can create a key from scratch without the need for an original key.

Can a bike run without a CDI?

Similarly, can a bike run without a CDI? Yes, you can with a mechanical unit. But customizing one will take lots of time and effort. It might be even more costly to custom build one as the CDI on the market shelf is mass produced one hence efficiently produced.

IT IS INTERESTING:  Quick Answer: How do I lower the height of my motorcycle?

What is the default Harley security code?

VIDEO-If your Harley Davidson is equipped with a factory installed alarm then you really need to immediately change your security PIN code. Harley puts a standard factory preset PIN code and it is usually 31313.

How do you reset the pin on a Harley 2021?

Turn the key to IGNITION. Immediately hold both turn signal indicators until FIVE dashes appear in the odometer gauge. Select the first digit of your PIN (a) by pressing the left turn signal button (a) times. Press the right turn signal switch one time to move to the next digit.

How do you disable a security system?

You can turn off or power down your home alarm system by disconnecting its backup battery and then unplugging the transformer for the device from the wall outlet. You can confirm that the panel has been powered down by checking its touchscreen or keypad and making sure that it is blank.

What does the key symbol mean on a Harley Davidson?

The red “key” light is telling you that the security system is operational. The fact that it goes out after you start it up means that the security system is disarmed.

What does the red light on a Harley speedometer mean?

With the Ignition switch off, put the bike into the “run” position, then turn on the ignition. This should put your bike into diagnostics mode. Use the “Trip” switch to cycle through the codes. anyway….that red light means check your codes!

Bikepost