If you are removing a chain with a clip-style master link, you can just pop the clip off and separate the chain with no special tools. Alternatively, you can simply cut your chain off if you’re just going to remove it and throw it away. You’d want to use a cutoff wheel and be careful of damaging anything but the chain.
Can you take a link out of a motorcycle chain?
Put a chain breaking tool on the chain and push the rivets out – do a bit on each side at a time until the chain ‘breaks’ open. … Once you’ve ‘broken’ apart the master link the chain will come apart and you can pull it through and free of the bike.
Scott Boerner151 подписчикПодписатьсяHow To Remove A Bike Chain Link Without Chain Tool In Less than 60 sec. GO
Can you get links taken out of a chain?
The Chain Shortening Process
To shorten an item, the jeweler simply measures how many inches need to be removed from one area of the item. … This is the most straightforward procedure for most simple chains, such as cable chains or ball chains.
How do you know if your motorcycle chain is stretched?
Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.
Do all motorcycle chains have a master link?
Some chains have a rivited master link so it looks like the other links. Check both sides of the chain for the master link clip, some people install the master with the clip inside so as not to ruin the cases if it comes apart. If still no master link then you have a chain with a rivited master link.
Can a jeweler shorten a chain?
For shortening a chain, the jeweler merely cuts the chain down to the requested length, reattaches the end portion (either the jump ring or the clasp) and solders everything shut. … This is part of a thick chain that was shortened by sawing through the links. To shorten a regular chain, the service is around $30-35.
Why does bike chain jump?
Most of the time, a skipping chain is caused by cable stretch. In the first half dozen rides on a new bike your shift cables stretch the most. They can also stretch over time as you ride. Hippley explains, “It takes cable tension to open a derailleur, which shifts your chain between gears.