What is the average power output of a pro cyclist?

An average pro in the Tour peloton will produce about 6.15 W/kg under the same conditions. Assuming a weight of 70 kg (a bit more than 154 lbs.), the average rider will be able to maintain a power output of 163.8 watts for the 20 minute effort while the pro will maintain 429.8 watts.

What is a good average power output cycling?

Most pro cyclists produce about 200 to 300 watts on average during a four-hour tour stage. The recreational rider, on the other hand, might be only able to sustain this wattage during a 45-minute or hour-long spin class.

Is 400 watts a lot of power cycling?

As you can see, the best human efforts at producing power over the course of an hour on a bicycle are around 300-400 Watts.

What is a good cycling FTP?

47% of people have an FTP below 3.2W/kg. 45% of people have an FTP of 3.4W/kg or more. 8% of people have an FTP between 3.2W/kg and 3.4W/kg.

IT IS INTERESTING:  Frequent question: Can I wash my bike helmet?

How many watts does a Tour de France rider generate?

Whereas an average cyclist can produce 100 watts, a pro cyclist can average 400 watts over the final hour of a Tour de France stage. Training intensity is the toughest variable to measure.

What is the 75 rule in cycling?

The 75-percent rule states that during a given training week, at least 75 percent of your miles (or time) should be at or below 75 percent of your maximum heart rate (MHR).

What was Lance Armstrong’s FTP?

Lance Armstrong said he used to be able to average 495 watts for 30-40 minutes.

What is good watts per kg?

Here are the categories that they recommend you race based on your FTP data and watts per kilogram. The Zwift C category (next from the bottom) says that you should be able to ride at the level between 2.5 to 3.1 w/kg. If you want to succeed in the A category, you’ll need to be able to hit 4.0 w/kg or better.

Is 4 watts per kg good?

So it is that many club level cyclists have the goal of being able to achieve a functional threshold power (FTP) of 4W/kg. … However, 4W/kg is still better than most club level cyclists, and is literally lapping everyone on the couch. So it’s a great goal to target.

What is a good FTP for a female cyclist?

How ‘good’ is your FTP?

World Class Pro Cat 4 and 5
Male 5.6 – 6.4 w/kg 2.4 – 3.6 w/kg
Female 5.3 – 5.6 w/kg 2.0 – 3.1 w/kg
IT IS INTERESTING:  You asked: Can I fit wider Tyres on my bike?

What is a reasonable FTP?

Average recreational cyclists would be about 2.5-3.0 Watts/Kg for FTP. People who race regularly may be 3.0-3.75. You get above 3.75-4.25 and those are local elite racers. Anything over 4.25 is domestic pro and it goes up from there.

Is 200 watt FTP good?

A 200 Watt FTP is bottom 10% of cyclist!?! That sounds about right, minus 1 word- 200 is the bottom 10% of COMPETITIVE cyclists. If you’re doing structured training, or even just riding hard 4+ days per week, most people will get over 200 without much trouble. … It’s the stated FTP of cyclists who use that application.

What is a pro cyclist FTP?

FTP is the acronym for Functional Threshold Power. In theory this is the max power that you can sustain for an hour’s riding. Once you know this number, it’s then used to set your training zones and help you gauge your riding efforts.

Is 20 mph fast on a bike?

20 is fast enough. I usually cruise around 17-18 mph and it feels like your getting where you’re going quickly enough. 20-25 feels really fast. 25+ which you hit on downhills is crazy fat and can even be scary.

Is 40 mph fast on a bike?

40mph downhill is not particularly fast or dangerous on a bicycle.

What is a good average mph on a road bike?

The majority of riders can average a speed of about 15 mph on a one hour ride. A good speed for a beginner is 10 mph, but you should be able to get to 15 mph pretty quickly. If you start training every once in a while, you could get your average up to 18 mph, but training on a regular basis could get you to 22 mph.

IT IS INTERESTING:  Where are Yamaha dirt bikes manufactured?
Bikepost