What do you need to change a bike chain?

What tools do I need to change a bike chain?

In order to replace your chain you will need either Master Link Pliers like our MLP-1.2 for chains with quick links, or a chain tool like our CT-3.2 for chains with connecting rivets, as well as chain lube for lubricating connecting rivets.

How much does it cost to replace a bike chain?

How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.

Not all bikes have master rivets. If your bike has a derailleur, it’s unlikely that your chain will have a master link. Bikes that typically do have chains with master links are BMX bikes and one- or three-speed town bikes with internal gears. … If the width is 1/8 inch, your chain should have a master rivet.

IT IS INTERESTING:  Which bike is suitable for 5 feet Man?

How do you change a chain on a bike without a chain tool?

Position the bike chain so that it is bridged across two solid supports such as blocks of wood or two wrenches. Take a punch tool and place it over one of the rivets in the chain. Use a hammer to push the rivet out and separate the chain to remove it. This method can also be used to shorten a new chain if necessary.

How often should I change my bike chain?

To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same.

How do I know what size chain my bike needs?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

Can you fix a broken bike chain?

To fix a broken or bent chain, you will need to remove it from your bike AND remove the broken or bent links. To do that, you will need a chain breaker tool. … Most multi-tools will come with a chain breaker attachment, make sure yours has one before you leave the house!

How long does a chain last on a bike?

A chain can last anywhere from about 500 miles to 5000, depending on the quality of the chain, the sprockets, how the bike is ridden, and the maintenance.

IT IS INTERESTING:  What gearing do track cyclists use?

Can you fix a rusted bike chain?

Step 1: Spray WD-40 Multi-Use Product directly onto the affected rusty surface. Step 2: Allow to sit for 10 minutes. Step 3: Use a wire brush to scrub at the unwanted rust. … Pro Tip: Now your bicycle chain is repaired and rust-free, why not keep it in tip-top condition by lubricating it with WD-40 BIKE® chain lube.

How to Remove Chain Links Without a Chain Breaker Tool

  1. Locate the section of the chain that you want to separate. …
  2. Place the head of the flathead screwdriver between the middle of the chain and the top plate on the chain, just below where the rivets were in Step 1. …
  3. Repeat steps 1-2 for the exact opposite side of the chain that you removed in the previous steps.

What can I use instead of a chain tool?

Removing a Chain Link Without Chain Breaker Tool

  • A Hammer.
  • A thin nail, or something that can hit the chain pin without getting stuck on the chainplates. A 2mm hex wrench can be used as well.
  • You will need something that can withstand a beating but has a hole in it for the pin to pass through.

Without any special tools, just a Hammer and nail

Then put the chain in a sideways position on a wood or a brick where the pin or rivet can get out easily by not sticking anywhere else. Then you need to place the nail punch or narrow screwdriver or whatever you can on the center of the rivet.

IT IS INTERESTING:  Is 30 minutes on the exercise bike good?
Bikepost