BigFun4Us571 подписчикПодписатьсяBicycle Cassette Removal without Special Tools
California MTB501 подписчикПодписатьсяHow to change a cassette without a chain whip.
What tools do I need to remove a bike cassette?
The lockring is designed to hold the cogs of the cassette in place on the hub. In order to remove and replace your cassette, you need to unscrew this lockring. You’ll need three tools to do this: a chain whip, a cassette lockring remover and a large adjustable crescent wrench.
Do you need chain whip to remove cassette?
Install spacers in same orientation as when removed. Grease threads of lockring and thread lockring into freehub. Install cassette lockring tool and install quick-release skewer. … For installing lockring, use of the sprocket chain whip tool is not required.
What can I use instead of chain whip?
If you have a regular claw hammer and another length of chain, then you can create your own chain whip. Just drape the length of chain through the claw part of the hammer with the majority of chain going away from the handle of the hammer.
What’s a chain whip for?
The chain whip is used in conjunction with a cassette removing tool to remove the lockring of a cassette from the freehub body. It is also used to remove a track cog from a hub.
How much does it cost to replace a cassette on a bike?
The cost to replace a cassette or freewheel can range anywhere from $25 to upwards of $300 on high end bikes and chainrings can run anywhere from around $40 to $250 on high end bikes.
How do I know what kind of cassette to get for my bike?
The number of cogs determines the type of chain (10 cogs = 10-speed chain) and of course the type of cassette you’ll want to order. (in our case a ten-speed) The two teeth counts tell you which cassette you’ll need. In our case it would be an 11-42 cassette. Don’t forget to check the front chainrings for wear.
Can I put any cassette on my bike?
In some cases, it is possible to run a cassette from a different brand than the rest of your drivetrain. SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets.