How wide should my mountain bike handlebars be?

Stem length also comes into play; typically, the longer your stem, the narrower you may want your bar width. This helps your body stay centered over the bike. If you’re running a stem that is 50 mm or less I’d suggest a 760 mm to 800 mm bar. If your stem is over 50mm, I’d start looking at bars less than 760mm wide.

How wide should your MTB handlebars be?

When it comes to mountain bike handlebars, wider is better. They offer you more control, easier breathing and better positioning for balance. … For bikes that are small, medium, large/extra large, we’d consider the following handlebar widths as ‘wide’, respectively: 650-680mm, 680-730mm, 730-750mm.

What width should my handlebars be?

As with any trend or reaction to advancement in one aspect of mountain bike design, handlebar width went too far on the spectrum. Moderate your decision a touch and you’ll find the best fit: which is between 750- and 800mm, and certainly not below or beyond that.

Are my handlebars too wide?

Notice the high elbows and shrugged shoulders? If you are most comfortable on your bars in this position, it’s quite possible they are too wide. Optimal shoulder mechanics will be present with a more externally rotated humerus (elbows down slightly).

IT IS INTERESTING:  Can I drive an electric bike with a DUI?

Are wider handlebars better?

Provides a better riding position:

When a rider grips the handlebars at a wider distance it allows the rider to be in a more controlled position on the bike as compared to a narrow grip. … Wider handlebars allow the rider to be in a better position to control the bike and keep the bike straight using just the hands.

How do I choose rise on handlebars?

Your preferred rise and sweep is what is most important, and anywhere from 10mm to 35mm rise could suit your trail or enduro bike nicely. Downhill Bikes: On downhill bikes, you will generally find the highest rise bars, that way it is easier to get your weight back over the rear wheel when descending on steep terrain.

What does a shorter stem do on a MTB?

Using a shorter stem gives the bike quicker handling characteristics and a more responsive feel. A longer stem shifts your body weight towards the front of the bike and puts you in a better pedaling position, especially on those steep climbs.

Should the saddle be higher than the handlebars?

As a general rule of thumb, you want the top of the handlebar about as high (or higher than) the saddle, unless you’re a sporty rider looking to ride fast. Try touching your elbow to the nose of the saddle and reaching forward towards the handlebar with your hand.

How do I know what size handlebars to get my bike?

Measuring Bar Diameter

If you don’t have callipers then you can use a simple measure tape. Just wrap around the bar at the point you want to attach the Oi to get the circumference size and then divide by pi (…. mmm) to get your diameter e.g. 99.9mm / = 31.8mm.

IT IS INTERESTING:  Does my bike TYRE have an inner tube?

Are wider MTB handlebars better?

Like bodies, not all bikes are the same. … Making the switch to a narrower handlebar will wake up the front end of your bike making it more twitchy and easier to maneuver; while a wider bar will increase the stability of your front end and provide a calmer feel than before.

Is 800mm too wide?

Registered. 800 is quite wide. Seems like the sweet spot is around 740-780 for most folks. if you are close to average hieght/ proportions on a modern mtb and you think you need bars that are narrower than that, there’s a good chance something.

What width handlebars do the pros use?

For reference, a stock bike that fits the tall Van Schip would come with at least a 44cm-wide handlebar. Some sprinters like Dehaes often use narrower bars, but in the 38-40cm range. Most riders have 40-42cm bars in the pro peloton.

Do wider handlebars make a difference?

For downhill bikes, using a wider bar gives you a good stable feel, you have more leverage in the corners, and that all gives you the confidence to ride more aggressively. Think of wider handlebars as having power steering for your car.

Where should my handlebars be?

Your handlebars should be at least as high as your seat, or even above it, so you can ride upright. If your handlebars are lower than your seat you’ll be pushed into your handlebars, and you’ll place more stress on your wrists, arms, neck, and back.

Are narrower handlebars faster?

With narrow bars, the rider’s frontal area is more compact, making it possible to push through the air quicker and easier.

IT IS INTERESTING:  Frequent question: Which mountain bike is best for cross country?
Bikepost