How do you maintain shocks on a mountain bike?

How do I maintain my mountain bike suspension?

What You Can Do at Home

  1. Clean Your Fork and Shock After Every Ride. Completely clean your fork and rear shock after each and every ride. …
  2. Turn Your Bike Upside Down. You can also turn your bike upside down now and then for about 20 minutes at a time. …
  3. Install a Mudguard. …
  4. Inspect Your Stanchions Regularly.


How often should mountain bike shocks be serviced?

How & When To Service or Tune Your Mountain Bike

Frequency Service
Every 3-6 Months 4. Check tubeless tire fluid sealant.
5. Check tire tread & sidewall integrity.
Every 6 Months-1 Year 1. Service rear shock.
2. Service frame.

How do you lubricate mountain bike shocks?

To encourage the oil to lubricate the upper bushes and the seals in the fork leg, it is helpful to turn the fork upside down to let the lubrication run down. Turn your bike upside down and allow 20 minutes for the oil to run down into the seals.

How much does it cost to service a mountain bike suspension?

Basic service is just that: basic. You will need some tools and supplies which will likely cost you $80-150 depending on what you got and what you want to do. For your annual service, you should do lowers service on the fork and your air can on the rear shock.

IT IS INTERESTING:  How do I know if my bike brakes need replacing?

How much does it cost to service a mountain bike?

Starting from £65.00 or the mechanic can recommend the service type after the inspection. There maybe a travel charge added over 10 miles travel @ £1/mile depending on location, you will be notified of any charge.

How long do mountain bikes last?

A mountain bike should last 20 years or more with proper maintenance.

Can shocks lock up?

There are times when your vehicle’s shock absorbers freeze, thereby impairing the proper functioning of your suspension system. Releasing the frozen shock absorbers remains a matter of getting in the right position to apply enough torque after lubricating the absorbers with penetrating oil.

What should I lubricate my mountain bike with?

De-greaser (a bike-specific degreaser or paraffin or kerosene). An assortment of brushes including a large, soft brush for the frame; a hard brush for the wheel rims and tires; and a long thin brush to get into all those hard-to-get-to nooks and crannies (an old toothbrush is ideal for this).

Can you use WD40 on bike suspension?

Yes you can use WD 40 on your chain…. The big problem is getting the WD 40 on the rubber seals in the rear wheel bearings, suspension bearings, and the BB bearings. The WD 40 can really clean up a chain…it is too light to stick around long enough to act as a good lubricant…

What is the best lubricant for bicycle chains?

Best bike chain lubes – our picks

  • Rock N Roll Gold. …
  • Silca Super Secret Chain Lube. …
  • Green Oil Wet Lube. …
  • Finish Line Wet. …
  • CeramicSpeed UFO Ceramic lube. …
  • Tru Tension All Weather. …
  • Molten Speedwax. Wax chains take a bit of extra work, but are well worth the effort. …
  • Squirt chain lube. High-performance, wax-based lube.
IT IS INTERESTING:  Is it illegal to bike on footpath NSW?


Can I use 3 in 1 oil on my bike chain?

Lubricate it

Using WD40 or 3-in-1 oil may seem pudent but it won’t things running smoothly and will cause dirt and grime to stick to the chain and prematurely wear.