No, all bicycle chains are not the same size. Size varies on the bike’s numbers of sprockets, speeds, the distance between the front chainring and rear cogs, and the number of teeth on them.
How do I know my bike chain size?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
Are 6 7 8 speed chains the same?
5, 6, 7 and 8 speed chains
Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. … Going further narrower, like a 10, or 11 speed chain on an 8 speed cassette can and often does work.
How do I know if my bike chain is too short?
You should also see two slight bends at each jockey wheel of the rear derailleur. If the chain is too short, this shift is difficult to make and the derailleur cage is stretched out and almost parallel to the chainstay. If the chain is really short, then you might not even be able to shift into the largest cog.
What size chain do I need for a 7-speed bike?
4 Answers. If you are using a bike with a derailleur the number of cogs on the rear hub will determine the chain size you will need. They are always 3/32″ chains. You can get a 5/6/7-speed, 8-speed, 9-speed, or 10-speed chains.
Is 7-speed bike enough?
Every rider has his comfort level while riding, So to summarise, 7- speed is good enough on a bike. … So a 7- speed bike provides the right number of speed gears with efficiency to ride on difficult terrains. As long as you are comfortable and happy with the 7- speed bike, the 7-speed will be enough for you.
Can I replace a 7-speed cassette with an 8 speed?
A seven speed cassette will fit on an 8 speed freehub with the use of a spacer.
How do I know what speed my bike is?
The only way to know what’s on your bicycle is by determining the number of teeth on the largest gear on your rear wheel. This is typically shown on the cassette’s packaging. For example, a road style 8 speed cassette might be marked as: 8 speed – 11-28t.
What size is standard bicycle chain?
Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.
Should I shorten bike chain?
Why Shorten a Bike Chain? All bikes come with a recommended bike chain length. It’s important to stick to this length if you want to ride comfortably and preserve the life of the rear derailleur. It’s the bike chain that does the work of getting the tires in rotation so that your bike can get in motion.
Can I use WD40 on bike chain?
Can I use WD-40 to lube my bicycle chain? No. You should never use WD40 as chain lubricant since WD-40 is NOT a true lubricant since it’s primary use is as a solvent or rust dissolver.
How often should I change my bike chain?
To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same.